High Impact Polystyrene (HIPS) is a dissolvable support material commonly used with ABS and ASA. It can be dissolved in d-Limonene, leaving your print free from marks caused by support removal.
An enclosed chamber is recommended to prevent warping while printing.
Air filtering and/or ventilation is required
Material: HIPS
Diameter: 1.75mm
Weight: 1kg / pack
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 220°C - 240°C |
| Heated Bed Temp | 90-100°C |
| Printing Speed | 40~60 mm/s |
Technical Data Sheet (TDS)
https://3dshop.co.nz/content/HIPS%20TDS-EN.pdf
