Material: ABS
Diameter: 1.75mm
Weight: 1kg / pack
Parts printed in ABS are more heat resistant than PLA or PETG.
An enclosed chamber is recommended to prevent warping while printing.
Air filtering and/or ventilation is required
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 240°C - 270°C |
| Heated Bed Temp | 90-110°C |
| Printing Speed | < 200 mm/s |
Please note - the label on the spool has a recommended Nozzle temperature of 220-240°C. Please ignore this and use 240-270°C instead
