Material: PLA Matte
Diameter: 1.75mm +/- 0.03mm
Weight: 1kg / pack
* Note about the Colours -
Matte Grass green is closer to Turquoise than green (see the example print below)
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 200°C - 230°C |
| Heated Bed Temp | 50-65°C |
| Printing Speed | < 200 mm/s |
Example print files -
https://makerworld.com/en/models/14265-marble-run-003 by Bambu Lab
1 Review Hide Reviews Show Reviews
-
Brown PLA
Purchased some Brown PLA to print buttons. Worked perfectly using my goto settings of nozzel 200c and bed 50c. Bed cover is blue masking tape. Photos - https://3dshop.co.nz/content/reviewphotos/1756790071.avif
