These spools differ slightly in colour and finish to our regular PLA. (Hard to see unless you directly compare them)
Prints great, just like our other PLA, but we only want to keep one type in stock so these ones are going cheap.
Material: PLA
Diameter: 1.75mm +/- 0.03mm
Weight: 1kg / pack
Spool Type: Plastic
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 190°C - 210°C |
| Heated Bed Temp | 50-70°C |
| Printing Speed | < 200 mm/s |
Transmission Distance (TD) Values for HueForge (measured using a TD1S. TD values are approximate and may differ between batches)
| SKU | Colour | TD |
| HC001 | White | 5.6 |
| HC002 | Black | 0.1 |
| HC004 | Gray | 3.3 |
| HC005 | Yellow | 5.9 |
| HC006 | Blue | 0.5 |
| HC007 | Green | 2.9 |
| HC008 | Orange | 5.1 |
| HC009 | Purple | 1.9 |
| HC010 | Red | 3.8 |
| HC011 | Silver | 0.4 |
| HC013 | Gold | 6.3 |
| HC014 | Skin | 3.4 |
