Clearance, Discontinued colour
The newer batch of Kingroon Green ABS is a darker colour (https://3dshop.co.nz/kingroon-abs-1kg/)
This lighter green colour is discontinued and will not be restocked.
-------------------
Parts printed in ABS are more heat resistant than PLA or PETG.
An enclosed chamber is recommended to prevent warping while printing.
Air filtering and/or ventilation is required
Material: ABS
Diameter: 1.75mm
Weight: 1kg / pack
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 220°C - 240°C |
| Heated Bed Temp | 90-110°C |
| Printing Speed | < 200 mm/s |
