Clearance
The colours have recently been updated, This listing is for the remaining stock of the old colours.
New colours -> https://3dshop.co.nz/kingroon-glow-in-the-dark-pla-1kg/
Glows in the dark after being exposed to sun light, or use a UV light for a stronger effect.
Material: PLA
Diameter: 1.75mm +/- 0.03mm
Net Weight: 1kg / pack
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 190°C - 210°C |
| Heated Bed Temp | 50-70°C |
| Printing Speed | < 150 mm/s |
Note - Glow in the dark filament has abrasive additives that may cause some printer parts to wear faster, we recommend using a hardened steel (or better) nozzle.
