New stock due to arrive 1st week of September
Gradient rainbow colour effect, Glow in the dark.
The rainbow colour is only visible when it is glowing, the regular colour is a translucent white.
Material: PLA
Diameter: 1.75mm +/- 0.03mm
Net Weight: 1kg / pack
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 200°C - 220°C |
| Heated Bed Temp | 50-60°C |
| Printing Speed | < 150 mm/s |
note - Glow in the dark filament has abrasive additives that may cause some printer parts to wear faster, we recommend using a hardened steel (or better) nozzle.
1 Review
-
Glow in the dark rainbow Filament
This filament does not like going through the Bowden tube in my multicolour filament unit. But once I fed it straight into the printer, it worked great. It glows quite nicely. Photos - https://3dshop.co.nz/content/reviewphotos/1749345685.avif https://3dshop.co.nz/content/reviewphotos/1749345686.avif
