Gradient rainbow colour effect, Glow in the dark.
The rainbow colour is only visible when it is glowing, the regular colour is a translucent white.
Material: PLA
Diameter: 1.75mm +/- 0.03mm
Net Weight: 1kg / pack
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 200°C - 220°C |
| Heated Bed Temp | 50-60°C |
| Printing Speed | < 150 mm/s |
note - Glow in the dark filament has abrasive additives that may cause some printer parts to wear faster, we recommend using a hardened steel (or better) nozzle.
