Silk PLA with two colours coextruded, showing different colours when you look at your prints from different angles
Material: PLA
Diameter: 1.75mm +/- 0.03mm
Weight: 1kg / pack
Note:
-The spool type may not match the photos, these currently come on a mix of plastic and cardboard spools.
-The shades of the individual colours between the different dual colour options may differ, especially the Red.
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 200°C - 220°C |
| Heated Bed Temp | 50-70°C |
| Printing Speed | < 200 mm/s |
links to example prints-
Baby Gemstone Dragon by Cinderwing3D
https://thangs.com/designer/Cinderwing3D/3d-model/Baby%20Gemstone%20Dragon-1060858
Crystalized Egg by Cinderwing3D
https://thangs.com/designer/Cinderwing3D/3d-model/Crystalized%20Egg-1060880
Crystal Spinner Fidget by Cinderwing3D
https://thangs.com/designer/Cinderwing3D/3d-model/Crystal%20Spinner%20Fidget-1239985
2 Reviews
-
Dual colour
the print was great - unfortunately the colour was the reason for the low rating, printed it was more pink than red, and didn't really reflect the colour i saw in the image.
-
Works well
Took me a while to dial this filament in but when I did, it worked fine. Very nice effect when printed. Bed temp 80 and nozzle at 195 worked for me.
