Matte PETG
A high-speed 3D printing material with a matte finish, offering a delicate texture and excellent visual appeal.
Typical applications
Ideal for creating models with a matte appearance.
Enhanced Toughness
Printed parts feature a smooth and refined surface finish, delivering a premium texture and impressive visual appeal.
Hot melt without clogging
High-speed printing capable, clog-resistant for improved print success rate.
Can be set at 225-255℃.
---------------------------------
Refill Only, A reusable spool is required to use.
Spool not included
Compatible with Bambu Lab style reusable spools
How to install video - https://www.youtube.com/watch?v=dQQuEsbVtK4
Note - Before removing the plastic strips, secure the filament end to the holes on the spool edge. Remove the plastic strips then press the filament down to make sure there are no gaps between the filament and the spool.
For best results it is recommended to dry PETG before use.
Material: Matte PETG
Diameter: 1.75mm +/- 0.03mm
Weight: 1kg / pack
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 225°C - 255°C |
| Heated Bed Temp | 50-70°C |
| Printing Speed | 50-350 mm/s |
Bambu Studio print profiles available here https://nextshapes.com/pla_series
