Polyvinyl alcohol (PVA) is a water-soluble filament commonly used to 3D print dissolvable support structures. Dissolvable supports are ideal for models requiring enhanced underside quality or complex geometries with support structures that would be difficult to remove manually.
PVA Filament is very sensitive to moisture and must be dried thoroughly before use. (45℃ for 10 hours is recommended)
Material: PVA
Diameter: 1.75mm +/- 0.03mm
Net Weight: 500g / pack
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 190°C - 220°C |
| Heated Bed Temp | 40-60°C |
| Printing Speed | < 50 mm/s |
