95A Hardness TPU capable of high speed (12 mm³/s MVS) printing.
For best results, dry TPU thoroughly before use. Dry at 55°C–65°C for 6 to 8 hours.
Glue on the print surface is recommended to aid in removing the finished print.
Material: TPU 95A HF
Diameter: 1.75mm +/- 0.03mm
Weight: 1kg / pack
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 220°C - 240°C |
| Heated Bed Temp | 30-60°C |
| Max Volumetric Speed | 12 mm³/s |
1 Review
-
TPU HF
This TPU HF prints fabulously perfectly straight out of the sealed bag. Needs around 1-2hours in drier thereafter. I found printing at 215 degrees and limiting to 8mm2/s worked well on my K1 Max for a quality print with sharp corners. Went up to a 0.6mm nozzle for a part wth overhangs. Also the 'Slow down for curled perimeters' and 'Avoid crossing walls' settings helped. I tried ironing on one part which left a buttery smooth top surface. And lastly I use acetone and a rag to matte the surface. Good product great price!
