PETG HF
The material combines excellent toughness and interlayer adhesion strength, enabling high-speed printing with outstanding building efficiency.
Typical applications
With exceptional dimensional stability, it is ideal for functional testing and printing high-performance parts.
Enhanced Toughness
Printed parts feature a smooth and refined surface finish, delivering a premium texture and impressive visual appeal.
Hot melt without clogging
High-speed printing capable, clog-resistant for improved print success rate.
Reusable Spool included
Note - Before removing the plastic strips, secure the filament end to the holes on the spool edge. Remove the plastic strips then press the filament down to make sure there are no gaps between the filament and the spool.
For best results it is recommended to dry PETG before use.
Material: PETG-HF
Diameter: 1.75mm +/- 0.03mm
Weight: 1kg / pack
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 230°C - 250°C |
| Heated Bed Temp | 70°C |
| Printing Speed | <300 mm/s |
Bambu Studio print profiles available here https://nextshapes.com/support/general-purpose-petg-series/
