Material: PET Carbon Fiber
Diameter: 1.75mm
Weight: 1kg / pack
PET Reinforced with ~10% carbon fiber.
It has the characteristics of high temperature resistance, low shrinkage and easy printing. It can be used on non-heated chamber FDM 3D printers. It has excellent rigidity and tensile strength and can be used for a long time at temperatures of
150°C*.
* To achieve high temperature resistance the parts must be annealed after printing.
PET CF is very sensitive to moisture. If you are experiencing excessive stringing or poor surface quality, dry the filament at 90℃~100℃ for 12 hours
Please use appropriate PPE when handling and processing prints containing Carbon Fiber.
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 280°C - 300°C |
| Heated Bed Temp | 80-100°C |
| Printing Speed | 40~150 mm/s |
Carbon Fiber is abrasive - Hardened nozzle required
