Support Filament for PLA or PETG
Use this for smooth, breakaway supports (not water soluble)
Works best in tool changer or dual nozzle printers.
If using in a single nozzle printer, ensure purge volumes are sufficient to prevent contamination.
Also available in 50g sample size https://3dshop.co.nz/50g-sample-filament/
Diameter: 1.75mm +/- 0.03mm
Net Weight: 1kg
| Recommended Printing Settings | |
| Print Layer Height | 0.2mm |
| Nozzle Temp | 190°C - 240°C |
| Heated Bed Temp | 50-60°C |
| Printing Speed | < 100 mm/s |
